Memory Information Sample 2 - HP C160 Owner's Manual

Memory Information Sample 2

The following sample shows the memory information when memory mod-
ules are not properly installed and configured. In this sample the memory
module in memory slot 1A is missing.
MEMORY INFORMATION
WARNING: Memory has been reconfigured due to a physical change or because the
Page Deallocation Table (PDT) was cleared. This is for information
only. No action is required.
MEMORY STATUS TABLE
Slot Size(a+b)
---- ---------
0a/b 64MB
1a/b ??MB
2a/b 128MB
---------
TOTAL 192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC
--- ----- ---
0x00000000 0 0
0
1
Group 0 interleaved
BAD MEMORY TABLE
SMC SMC Status Bank
--- ---------- ----
0 Present
1 Present
2 Present
Active, installed memory (bytes)
Deallocated pages (bytes)
Available Memory (bytes)
Good Memory Required by OS (bytes):
Memory
HVERSION SVERSION
-------- ----------
0x0710 0x0900
Displaying the Current Memory Configuration
Status
------
Configured
SIMM not seated properly.
Configured
SMC Status Bank Bank Status
---------- ---- -----------
Configured 1 Configured
Configured 3 Configured
Configured 1 Configured
2 ways over 3 banks
Bank Status SIMM Size
----------- ---------
0 Not Present 0MB
2 Not Present 0MB
0 Not Present 0MB
2 Not Present 0MB
3 Not Present 0MB
0 Sizing Error 0MB
1 Not Present 0MB
2 Sizing Error 0MB
3 Not Present 0MB
: 201326592 of Standard DRAM
-
-----------
: 201326592
The Boot Console Interface
Size Slot
---- ----
64MB 2a/b
64MB 0a/b
64MB 2a/b
Slot
----
5a/b
4a/b
5a/b
4a/b
0a/b
1a/b
3a/b
1a/b
3a/b
0
0 (Not Set by OS)
197