Operating The Floppy Drive; Verifying The Floppy Drive Configuration - HP C160 Owner's Manual

Operating the Floppy Drive

This section describes how to perform tasks with your 3.5-inch floppy disk
drive.
Verifying the Floppy Drive Configuration
To verify that your workstation can communicate with the floppy drive, use
the ioscan command to see which devices are currently in use on your sys-
tem.
1 In a terminal window, enter the following at the prompt:
ioscan
After a few moments the ioscan utility lists all of the I/O devices it could
find. If there is a floppy drive in the list, that listing appears similar to the
following:
H/W Path
============================================
8
8/0
8/16/10
Using Your 3.5-Inch Floppy Disk Drive
Class Description
bc I/O Adapter
graphics Graphics
pc Built-in Floppy Drive
Operating the Floppy Drive
63