Installing The Option Board - HP C160 Owner's Manual

Installing the Option Board

Follow these steps to install a GSC, EISA, or PCI board into your worksta-
tion:
1 Remove the main tray assembly as described in "Removing the Main Tray As-
2 Press the fan release clip and rotate the fan, as shown in Figure 50.
Figure 50
3 Remove the screw from the EISA retainer, and remove the EISA retainer, as
Figure 51
sembly" earlier in this appendix.
Rotating the Fan
shown in Figure 51.
Removing the EISA Retainer
Changing Your Workstation's Hardware Configuration
Installing an EISA, PCI, or GSC Option Board
EISA Retainer
141