HP C160 Owner's Manual page 206

The Boot Console Interface
Displaying and Setting Paths
The paths are displayed in Mnemonic Style Notation, as shown in Table 31.
Table 31 Mnemonic Style Notation
To display the current setting for a particular system path, follow the direc-
tions in "Accessing the Boot Console Interface" earlier in this appendix, and
then type the following at the prompt:
where path_type is one of the path types listed in Table 30.
For example, to get the path to the primary boot device, follow the directions
in "Accessing the Boot Console Interface" earlier in this chapter, and then
type the following at the prompt:
To set a system path to a new value, follow the directions in "Accessing the
Boot Console Interface" earlier in this chapter, and then type the following
at the prompt:
where path_type is one of the path types listed in Table 30 and path is the
specification of the path in Mnemonic Style Notation (as described in Table
31). For example, to set the primary boot path to a SCSI disk with an ID of
6.0, follow the directions in "Accessing the Boot Console Interface" earlier
in this appendix, and then type the following at the prompt:
188
I/O Type
Built-in UWSCSI fwsci.scsi_address.logical_unit_number
Built-in FWSCSI fwsci.scsi_address.logical_unit_number
Built-in SCSI sescsi.scsi_address.logical_unit_number
Optional gscn.scsi_address.logical_unit_number
Built-in LAN lan.server_address.init_timeout.io_timeout
Main Menu: Enter command >
Main Menu: Enter command >
Main Menu: Enter command >
Main Menu: Enter command >
Specification Format
path path_type
path primary
path path_type path
path pri sescsi.6.0