1.3. Overview
The iKAN series display is equipped with a number of interfaces and peripherals that can be
integrated with external systems. Here is an overview of the components and a description of
each.
LED Indicator
Terminal Block
The details of these items are as follows:
● Reset Button
The reset button is used to check the IP address and restore all settings to the factory default.
By pressing the Reset button for 5 seconds, the IP address for the iKAN series device will be
shown on the display. This is very useful, especially when you have forgotten the IP address
needed to access the iKAN series display.
By pressing the Reset button for 8 seconds, all messages and variable configuration settings will
be reset to the factory defaults.
iKAN Series Display User Manual
Reset Button
Ethernet Port
(E1 and E2)
Power Input
v 1.1.0
Page: 12