Table of Contents
Advertisement
3.2.3. Serial Port Configuration
The two RS-485 serial ports on the iKAN display can be used to connect to a PC, a PLC or CL/DL
series modules. It allows the PC or PLC to control the message display using Modbus RTU protocol.
Alternatively, connect to the DL/CL series modules series modules for displaying measured data in
text messages, without the intervention of a host PC.
The default parameters are:
Baud Rate:
115200
Data Bits:
8
Stop Bit(s):
1
Parity:
None
iKAN Series Display User Manual
v 1.1.0
Page: 56
Advertisement
Table of Contents
