ICP DAS USA iKAN Series User Manual page 111

2. Enter the following mapping text, and then click the Update button
i. In the ON Text column, enter the mapping text in the text field for when the status of the
coil-type variable is set to ON status.
ii. In the OFF Text column, enter the mapping text in the text field for when the status of the
coil-type variable is set to OFF status.
The value for coil variable 1 is now replaced by the mapping text on the display.
Coil variable 0 = 1
Coil variable 0 = Operating
iKAN Series Display User Manual v 1.1.0 Page: 111