Table of Contents
Advertisement
The measured data related to items such as temperature, relative humidity and concentration of
CO/CO2 to be inserted into a message as a variable. The format for using a variable in a message
is a 5-byte string, as follows:
1
Delimiter Character
%
Simply enter the information for the connected modules and put the variable symbol for the
measurement item into a message, and then the value of measurement data can be displayed in
the message and be automatically refreshed when it is displayed on the iKAN series device.
Before starting the configuration process, make sure that your CL/DL series device(s) is well
configured and connected to the Ethernet or RS-485 port on the iKAN device. Also, confirm that
the power of each device is turned on.
iKAN Series Display User Manual
2
Variable Type
y: System variable
3 to 5
Modbus Address: 3-digit decimal number
X
X
v 1.1.0
X
Insert variable symbol
into a message
Page: 113
Advertisement
Table of Contents
