Inserting Coil-Type Variables Into A Message - ICP DAS USA iKAN Series User Manual

4.2.4. Inserting Coil-type Variables into a Message

The iKAN display device provides Modbus registers for 40 coil variables, allowing the Host PC or a
PLC to read or write data via the Modbus TCP/ RTU protocol. These values can also be inserted
into a message. If these values are modified via a remote Host or a PLC, the value will be
automatically refreshed when it is displayed on the iKAN series device.
The format for using a variable in a message is a 5-byte string, as follows:
1
Delimiter Character
%
A maximum of 40 Coil type variables can be stored on the iKAN series device, and are accessed
using Modbus register addresses 00000 to 00039.
Modbus Address
Decimal Hex.
00000 0000
: :
00039 0027
iKAN Series Display User Manual
2
Variable Type
b: Coil
Length Description
40 Coil-type variables
3 to 5
Modbus Address: 3-digit decimal number
X X
-
v 1.1.0
X
Value
Attribute
Range
R/W
Page: 92