Displaying Data From Cl/Dl Modules Connected To Rs-485 - ICP DAS USA iKAN Series User Manual

5.2. Displaying Data from CL/DL Modules Connected to RS-485

■
Enabling the Modbus RTU Master mode
1. Select the COM port used to connect the CL/DL series module.
2. Select Connect to DL series modules from the drop-down menu in the Modbus RTU Master
section on the Serial Port subpage of System, and then click the Save Settings button.
1
2
3
iKAN Series Display User Manual v 1.1.0 Page: 123