System Configuration - Mitsubishi Electric MDS-EX-CV Series Specifications And Instruction Manual

MDS-EX-CV/CVH Series Specifications and Instruction Manual
1 Introduction

1.1 System Configuration

This manual is a power supply unit "MDS-EX-CV/CVH Series" specifications and instruction manual. Before using the unit,
read the following instruction manuals thoroughly to ensure correct usage.
 MDS-E/EH Series Specifications Manual (IB-1501226(ENG))
 MDS-E/EH Series Instruction Manual (IB-1501229(ENG))
1.1 System Configuration
1-axis
servo drive unit servo drive unit
(MDS-E/EH-V1) (MDS-E/EH-V2)
From NC
Optical
communication
cable
CN2
CN20
CN2L
CN3L
Brake
CN2M
connector
CN3 CN3M
L+
L-
Grounding
wire
Power
To 2nd
connector
axis servo
To 3rd
axis servo
To brake control
Power cable (Only connector is supplied.)
Brake cable (Only connector is supplied.)
Servo encoder cable
< Motor side encoder cable >
Servo encoder cable
<MDS-EX-HR unit cable >
Servo encoder cable
< Linear scale cable> (Note) Prepared by user.
Servo encoder cable
< Ball screw side encoder cable >
IB-1501700-A
2-axis Spindle
drive unit
(MDS-E/EH-SP)
Battery cable
Power supply
communication
cable
CN4
Optical
communication
cable
CN2
For external
emergency
stop
CN3
Grounding
wire
Power
connector
Contactor control output
Spindle encoder cable
< Motor side PLG cable >
Spindle encoder cable
< Spindle side encoder cable >
Brake connector
Power connector
Servo motor
Encoder conversion unit
(MDS-EX-HR)
Ball screw side encoder
Power supply
Battery option
or
unit
cell battery
(MDS-EX-CV/CVH)
for servo drive unit
< Battery option >
Battery box
DOCOM DOCOM
DO(ALM) DO(ALM)
LG LG
+5V +5V (MDSBTBOX-LR2060)
LG LG
BT(3.6V) BT(3.6V)
CH1 CH1 CH1 CH1 BTO1 BTO1 BTO1 BTO1 BTO2 BTO2 BTO2 BTO2 BTO3 BTO3 BTO3 BTO3 CH2 CH2 CH2 CH2
CN24
< Cell battery >
Cell battery built in
CN23
drive unit
(MDS-BAT6V1SET)
Circuit protector or
protection fuse
(Note) Optional parts
Power cable (Only connector is supplied.)
Spindle side encoder
ABZ SIN wave signal output
Servo encoder cable
< Linear scale cable for MDS-EX-HR>
(Note) Prepared by user.
Mitsubishi serial signal output
2
MDS-E Series:
3-phase 200VAC power supply
MDS-EH Series:
3-phase 400VAC power supply
Circuit protector
(Note) Optional
parts
AC reactor
(D/DH-AL)
Contactor
(Note) Optional
parts
Spindle motor
Linear scale
(for full closed loop control)
(Note) Prepared by user.