Nortel CallPilot Installation Manual page 37

To set the modem DIP switches
Use a pair of tweezers or a small screwdriver to set the DIP switches as
described in the "Change to" column of the following table:
DIP Default
switch setting
1 OFF
2 OFF
Copyright © 2007, Nortel Networks
.
Note: ON is down. OFF is up.
Change
to
OFF
OFF
Nortel CallPilot
703t Server Hardware Installation
NN44200-304 01.01 Standard
5.0 23 February 2007
Function
Data Terminal Ready (DTR) override
• OFF: Normal DTR operations. (The computer
must provide a DTR signal for the modem to
accept commands. If DTR is dropped, the call
is terminated.)
• ON: The modem ignores DTR (override).
Verbal/numeric result codes
• OFF: Verbal (word) results.
• ON: Numeric results.
Preparing the modem 37
Nortel Networks Confidential