Network Connectivity - Nortel CallPilot Installation Manual

Slot definition and numbering
In the following table, the term "slot" refers to the available slot openings in
the chassis, not the PCI connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is
the bottom slot in the chassis when the chassis is standing upright.
Slot number
7
(not a slot)
PCI slot 6
(full length)
PCI slot 5
(full length)
PCI slot 4
(full length)
PCI slot 3
(full length)
PCI slot 2
(full length)
PCI slot 1 (full length)
a. In CallPilot Manager applications, the CallPilot-assigned board label may
appear. This lable corresponds to the slot number. For example, BRD01 refers
to the board in slot 1.

Network connectivity

This section describes how the 703t server can be integrated into your
network. The integration depends on the type of switch you are using.
To secure the CallPilot server from unauthorized access, ensure that the CallPilot
network is inside your organization's firewall.
Sample network setup: Meridian 1
The Meridian 1 switch can be one of the following:
•
•
Copyright © 2007, Nortel Networks
.
Note: Your server may vary depending on what was ordered from
Nortel; therefore, your server may not have all of the slots populated.
Option 11C or Option 11C Mini using fiber connections
Option 51C
Nortel CallPilot
703t Server Hardware Installation
NN44200-304 01.01 Standard
5.0 23 February 2007
CallPilot-
assigned
board label a
Not used
BRD06
BRD05
BRD04
BRD03
BRD02
BRD01
ATTENTION
Network connectivity 17
Meridian 1
or
Communication Server
1000
Not used
RAID card
Not used
MPB96 board
Not used
Not used
Not used
Nortel Networks Confidential