Nortel CallPilot Installation Manual page 27

To remove the side panel
The following diagram shows how to remove the side panel. See the
instructions for removal below.
Copyright © 2007, Nortel Networks
.
WARNING
Risk of personal injury
Be careful when you handle the sharp edges of the side panel and
chassis to prevent personal injury.
CAUTION
Risk of equipment damage
• Use an ESD wrist strap to protect static-sensitive
components.
• Place the server on its side to prevent the server from
accidentally falling over. This provides greater stability.
If you attempt to work with the server in its standing
position, it may tip over when you work with the interior
components.
Nortel CallPilot
703t Server Hardware Installation
NN44200-304 01.01 Standard
5.0 23 February 2007
Removing the side cover 27
Nortel Networks Confidential