Eval-Ad7492Sdz Basic Hardware Setup - Analog Devices EVAL-AD7492SDZ User Manual

EVAL-AD7492SDZ User Guide

EVAL-AD7492SDZ BASIC HARDWARE SETUP

The AD7492 evaluation board connects to the EVAL-SDP-CB1Z.
The EVAL-SDP-CB1Z board is a controller board that is the
communication link between the PC and the main evaluation
board. Figure 2 shows a photograph of the connections made
between the AD7492 daughter board and the
board.
Before connecting power, connect the
to Connector A or Connector B on the
Nylon screws are included in the
kit and can be used to ensure that the
the EVAL-SDP-CB1Z boards are connected firmly together.
Once the EVAL-AD7492SDZ
are connected securely, connect the power supplies on the
EVAL-AD7492SDZ board. The
external power supply that is included in the evaluation board kit.
EVAL-SDP-CB1Z
EVAL-AD7492SDZ board
EVAL-SDP-CB1Z board.
EVAL-AD7492SDZ evaluation
EVAL-AD7492SDZ
and the EVAL-SDP-CB1Z boards
EVAL-AD7492SDZ requires an
Connect this power supply to the J702 connector on the
AD7492SDZ
used to power the
on the required power supply connections and options are detailed
in the Power Supplies section.
Before connecting the
that the AD7492
CD. The full software installation procedure is detailed in the
Evaluation Board Software section.
Finally, connect the
USB cable enclosed in the
and
Windows XP platform, users may need to search for the
SDP-CB1Z drivers. If prompted by the operating system, choose
to automatically search for the drivers for the EVAL-SDP-CB1Z.
Rev. 0 | Page 7 of 24
board. Alternatively, a bench power supply can be
EVAL-AD7492SDZ via J700. Further details
EVAL-SDP-CB1Z board to the PC, ensure
software has been installed from the enclosed
EVAL-SDP-CB1Z board to the PC via the
EVAL-SDP-CB1Z
UG-371
EVAL-
kit. If using the
EVAL-