Eval-Ad7656-1/57-1/58-1Sdz Basic Hardware Setup - Analog Devices EVAL-AD7656-1SDZ User Manual

Evaluation Board User
Guide
EVAL-AD7656-1/57-1/58-1SDZ BASIC
HARDWARE SETUP
The AD7656-1/57-1/58-1 evaluation board connects to the
(EVAL-SDP-CB1Z) System Demonstration Board. The EVAL-
SDP-CB1Z Board is the controller board, which is the
communication link between the PC and the main evaluation
board. Error! Reference source not found. shows a photograph
of the connections made between the AD7656-1/57-1/58-1
daughter board and the EVAL-SDP-CB1Z board.
Before connecting power, connect the EVAL-AD7656-1/57-
1/58-1SDZ board to connector A or connector B on the EVAL-
SDP-CB1Z board. Nylon screws are included in the EVAL-
AD7656-1/57-1/58-1SDZ evaluation kit and can be used to
ensure the EVAL-AD7656-1/57-1/58-1SDZ board and the
EVAL-SDP-CB1Z board are connected firmly together.
e section.
Finally connect the EVAL-SDP-CB1Z board to the PC via the
USB cable enclosed in the EVAL-SDP-CB1Z kit. If using
Once the EVAL-AD7656-1/57-1/58-1SDZ board and the EVAL-
SDP-CB1Z board are connected securely, connect the power
supplies on the EVAL-AD7656-1/57-1/58-1SDZ board. The
EVAL-AD7656-1/57-1/58-1SDZ requires an external power
supply which is included in the evaluation board kit. Connect
this power supply to the connector J702 on the EVAL-AD7656-
1/57-1/58-1SDZ board. Further details on the required power
supplies connections and options are detailed in Table 3
Before connecting the EVAL-SDP-CB1Z board to your
PC, ensure that the AD7366/67 software has been
installed from the enclosed CD. The full software
installation procedure is detailed in the
Windows XP platform, you may need to search for the EVAL-
SDP-CB1Z drivers. Choose to automatically search for the
drivers for the EVAL-SDP-CB1Z board if prompted by the
operating system.
Rev. PrA | Page 13 of 32
UG-AD7656-1/57-1/58-1