Nortel Vpn Router 2700 And 2600 Option Installation - Nortel Contivity 2600 Install Manual

Chapter 6
Nortel VPN Router 2700 and 2600 option
installation
This chapter provides instructions on how to install and replace the following field
replaceable units (FRU) in the VPN Router 2700 and the VPN Router 2600:
•
•
•
•
This chapter contains the following topics:
Topic
Shutting down the system to add or replace hardware
Removing the front bezel and top cover
Attaching the antistatic wrist strap
Installing or replacing option cards
Installing or replacing DIMMs
LAN, WAN, and serial interface cards
Secure Sockets Layer (SSL) VPN Module 1000 (VPN Router 2700 only)
VPN accelerator cards (VPN Router Security Accelerator card and Hardware
Accelerator card)
dual inline memory modules (DIMM)
Note: The VPN Router 2700 and the VPN Router 2600 look very
similar. The differences in these gateways are small enough so that a
figure of one gateway—for example, the VPN Router 2700—can
represent the VPN Router 2600 for the purposes of this chapter.
Nortel VPN Router Installation — Hardware Options
97
Page
98
99
102
103
109