Figure 52 Removing A Nortel Vpn Router 4600 Hard Disk Drive - Nortel Contivity 2600 Install Manual

Figure 52 Removing a Nortel VPN Router 4600 hard disk drive

Insert and turn key, then
remove hard disk by handle.
3
Insert the replacement hard drive fully, and lock it by turning the key
clockwise.
Ensure that the hard disk drive LED shows the proper drive number.
4 Replace the front bezel.
If you need to reload the software on the disk, see the information about using the
recovery diskette in the book Installing the Contivity 4600 Software (311641-A).
Enable the Nortel VPN Router 4600 by following these steps:
1 Use your Web browser to navigate to the gateway.
Choose Admin > File System window.
2
3 Click on the drive.
Chapter 8 Nortel VPN Router 4600 option installation 141
Nortel VPN Router Installation — Hardware Options
Drive 0
Drive 1
CS460011A