Shutting Down The System To Add Or Replace Hardware - Nortel Contivity 2600 Install Manual

50 Chapter 3 Nortel VPN Router 1700 and 1600 option installation

Shutting down the system to add or replace hardware

To install or replace an option card or a DIMM, you must first shut down the VPN
Router 1700 or VPN Router 1600 and unplug it.
To shut down the VPN Router 1600 or 1700:
1
2
3
4
NN46110-317 02.01
Caution: Risk of equipment damage or data loss
Shut down the gateway as described in this section before you attempt to
add or replace an option card or DIMM.
Use the Web graphical user interface (GUI), or the command line interface
(CLI) to shut down the gateway.
• Web GUI: Choose Admin > Shutdown. Select the option to power off the
gateway after shutdown.
• CLI: Use the
reload
enter
reload power-off disable-logins "Upgrade hardware"
For the complete syntax of the
Router Using the Command Line Interface (NN46110-507).
Wait for the system to shut down.
Disconnect the power cord from the power outlet.
Disconnect the cord from the VPN Router 1700 or 1600.
The power receptacle is on the rear of the gateway.
command to shut down the system. For example,
command, see the Nortel VPN
reload