Figure 45 Installing Or Removing A Dimm - Nortel Contivity 2600 Install Manual

126 Chapter 7 Nortel VPN Router 2750 option installation
5
6
7
8
9

Figure 45 Installing or removing a DIMM

Alignment keys
NN46110-317 02.01
If you are replacing a DIMM, remove the installed DIMM as follows:
a
Press down the locking lever on either side of the DIMM
b Pull the DIMM up to remove it from the slot.
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
Place the new or replacement DIMM in the slot
Use the alignment keys to properly position the DIMM in the slot.
Press the DIMM firmly into the socket.
Pull up the locking lever on either side of the DIMM to snap it into position.
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
(Figure 45).
(Figure
(Figure 45).
Locking lever
CS260019A
45).