Figure 38 Installing Or Removing A Dimm - Nortel Contivity 2600 Install Manual

Chapter 6 Nortel VPN Router 2700 and 2600 option installation 111

Figure 38 Installing or removing a DIMM

Alignment keys
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
10 Replace the top cover on the chassis
a
Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
11 To install the gateway in an equipment rack, do the following.
a
Set the VPN Router 2700 or 2600 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws.
(Figure 33 on page
Nortel VPN Router Installation — Hardware Options
Locking lever
CS260019A
100).