Figure 36 Installing Or Removing An Option Card - Nortel Contivity 2600 Install Manual

Chapter 6 Nortel VPN Router 2700 and 2600 option installation 107
4
Attach the antistatic wrist strap that was shipped with the gateway (see
"Attaching the antistatic wrist strap" on page
5
Locate the slot where you plan to install the new or replacement option card.
Caution: Do not try to install a HSSI WAN interface card or a
Hardware Accelerator card in slot 4 of the VPN Router 2700.
6
Remove the filler panel screw and pull out the filler panel (or the option card
that you are replacing) from the slot

Figure 36 Installing or removing an option card

Option card
Motherboard
(Figure
Rear of unit
Option card slots
Nortel VPN Router Installation — Hardware Options
102).
36).
Filler panel screw
CS2600017A