Function - Gira KNX 5062 00 Operating Instructions Manual

Switching actuator 2-gang / blind actuator, 1-gang 16 a with binary input, 3-gang
Table of Contents

Advertisement

Switching actuator 2-gang / blind actuator, 1-gang 16 A with binary input, 3-gang
3

Function

System information
This device is a product of the KNX system and complies with the KNX directives.
Detailed technical knowledge obtained in KNX training courses is a prerequisite to
proper understanding.
The function of this device depends upon the software. Detailed information on load-
able software and attainable functionality as well as the software itself can be ob-
tained from the manufacturer´s product database.
The device can be updated. Firmware can be easily updated with the Gira ETS Ser-
vice App (additional software).
The device is KNX Data Secure capable. KNX Data Secure offers protection against
manipulation in building automation and can be configured in the ETS project. De-
tailed specialist knowledge is required. A device certificate, which is attached to the
device, is required for safe commissioning. During mounting, the device certificate
must be removed from the device and stored securely.
Planning, installation and commissioning of the device are carried out with the aid of
the ETS, version 5.7.3 and above.
Intended use
Operating in KNX systems
Switching electrical loads via relay contacts with common reference potential
Switching of electrically-driven Venetian blinds, roller shutters, awnings and
similar hangings
Reading in switching states of installation switches or push-buttons and other
potential-free contacts at inputs 1...3
Signal evaluation of condensation and leakage sensors at inputs 1...3 (see ac-
cessory).
Acquisition of temperature values via NTC temperature sensor at input 3 (see
accessories)
Mounting in appliance boxes according to DIN 49073
Product characteristics
Outputs can be operated via KNX telegrams or extension inputs
Three extension inputs for connecting potential-free contacts or dew/leakage
sensors. NTC temperature sensor can be connected to input 3.
Supply via KNX, no additional power supply necessary
KNX Data Secure compatible
Updatable with Gira ETS Service App
82404232
29.11.2022
5 / 13

Advertisement

Table of Contents
loading

Table of Contents