Settings & Programming; A) Setting The Time And The Weekday; B) Programming The Comfort Temperature And The Lowering Temperature - Conrad Electronic 61 59 35 Operating Instructions Manual

11. Settings & Programming

a) Setting the time and the weekday

• During initial start-up or after a reset, e.g. "00:00" appears on the display.
• Set the time by means of the keys "h" (hour) and "m" (minute).

Press and hold the respective key to activate the fast-setting mode.
• Set the weekday by means of the "d" key.

b) Programming the comfort temperature and the lowering temperature


You have to be in normal operating mode (not in the setting menu).
For the heating mode, the comfort temperature is the "higher" temperature and
the lowering temperature is the "lower" temperature (e.g. at night).
This is reversed for cooling mode.
The programmed comfort or lowering temperature applies to all switching
programs.
Setting the comfort temperature
• Briefly press the "
symbol.
• Press the "Temp." key. The saved comfort temperature appears on the display and flashes.
• By briefly pressing the "
Press and hold the key to activate the fast-setting mode.
• Save the setting with the "OK" key or wait for 15 seconds.
SUN MON TUE WED THU FRI SAT
0 6 12
" key for the comfort temperature. The display shows the "
" key several times, you can now set the comfort temperature.
°C
PROG
18 24
"
39