Conrad Electronic 61 59 35 Operating Instructions Manual page 30

• To the device, connect rigid installation cables for stationary installation
only. For the use of flexible cables, suitable wire end ferrules must be used.
The device must be fastened within a fixed installation (e.g. wall installation
by means of screws / dowels).
• The product must be installed and operated in closed and dry indoor rooms
only (i.e. not in bathrooms etc.). Do not expose the device to direct sunlight,
extreme temperatures, moisture or humidity.
Never touch the product when your hands are wet or damp.
There is danger of a life-threatening electric shock!
• Do not operate the device next to or in the vicinity of flammable liquids or
gases, air/gas mixtures (fuel vapors) or easily flammable solid substances.
Due to operation of the device, sparks might be emitted which might involve
ignition of the gases or the air/gas mixtures. Danger of explosion!
• Use the device only in moderate climate regions and not in tropical climate.
• In industrial facilities, the safety regulations laid down by the professional
trade association for electrical equipment and facilities must be adhered to.
• Consult an expert when in doubt about the mode of operation, safety or
connection of the device.
• Handle the product carefully and do not drop it; shocks, impacts or even a
fall from a low height might damage it.
32