C) Manual Mode - Conrad Electronic 61 59 35 Operating Instructions Manual

Setting the lowering temperature
• Briefly press the "
symbol.
• Press the "Temp." key. The saved lowering temperature appears on the display and
flashes.
• By briefly pressing the "
Press and hold the key to activate the fast-setting mode.
• Save the setting with the "OK" key or wait for 15 seconds.
Please observe:

The displayed value can be increased in increments of 0.5°C, until a temperature
of 30°C is reached. When actuating the key again, the display shows 5°C and
you can continue to set the desired value.
Press and hold the respective key to activate the fast-setting mode.
At a temperature of 7°C, the "
temperature is the preset anti-freeze temperature which cannot be changed for
safety reasons.
To save your setting, press the "OK" key. The display now is in normal
operating mode. Alternatively, wait for approx. 15 seconds without pressing
any key.

c) Manual mode

In normal operating mode, briefly press the "
comfort or lowering temperature.
The temperature currently set e.g. by a switching program is skipped and the comfort or
lowering temperature is selected by the room thermostat.
To return to normal display mode, either press the "OK" key or wait for approx. 15 seconds
without pressing any key.
In manual mode, the display shows a small hand symbol "

If the time of a switching program activated/selected by you is reached/
exceeded, it will be executed again and the hand symbol disappears. You will
exit the manual mode.
40
" key for the lowering temperature. The display shows the "
" key several times, you can now set the lowering temperature.
" symbol appears on the display. This
" or the " " key once to activate the saved
" in the bottom right corner.
"