Aerodr Generator Interface Unit2 - Konica Minolta AeroDR SYSTEM Operation Manual

2.2 Component names and functions

2 .2 .10 AeroDR Generator Interface Unit2

The component names and functions of the AeroDR Generator Interface Unit2 are as follows.
(1) Base cover
(8) Power cable connector
(9) AC adapter
Number
(1) Base cover
(2) LEDs
(3) Power cable connector socket
(4) Base BOX
(5) LAN port
(6) Power switch
(7) X-ray link cable outlet
(8) Power cable connector
(9) AC adapter
(10) Power plug
(11) Hand switch
(2) LEDs
(4) Base BOX
(10) Power plug
Name
Protects the internal parts.
Indicate the status of the AeroDR Generator Interface Unit2.
This is the socket of the Power cable connector.
Protects the internal parts.
Connects to the Ethernet cable.
• Used to turn the AeroDR Generator Interface Unit2 on/off.
• It is only installed when the AC adapter is used.
Outlet for various X-ray link cables.
Plug into the power cable socket of AeroDR Generator Interface Unit2.
Used to supply power to the AeroDR Generator Interface Unit2.
When S-SRM connection is adopted, a hand switch is installed in the AeroDR
Generator Interface Unit2.
(3) Power cable connector socket
(5) LAN port
(7) X-ray link cable outlet
(6) Power switch
Functions
52
(11) Hand switch