Konica Minolta AeroDR SYSTEM Operation Manual page 120

6.1 Maintenance and inspection items
3
Peel off the center piece of the release
paper from the AeroDR Grip sheet, and
temporarily affix the sheet to the required
position on the DR Detector .
Release paper
AeroDR Grip sheet
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Place the AeroDR Grip sheet in the correct position
so that it does not overlap the DR Detector label.
• • • •• • • •• • •• •••••••••••••••••••••••••••••••••••••••••
4
Peel off the left and right pieces of the
release paper from the AeroDR Grip sheet
and affix the sheet to the required position
on the DR Detector .
AeroDR Grip sheet
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Affix the sheet slowly from the center to the right
and left sides to attach it tightly to the DR Detector.
• Confirm that the AeroDR Grip sheet has been se-
curely placed.
• • • •• • • •• • •• •••••••••••••••••••••••••••••••••••••••••
5
Repeat the same steps to affix the other
three sheets .
AeroDR Grip sheet
affixing position
AeroDR Grip sheet
affixing position
120