Aerodr Interface Unit2 - Konica Minolta AeroDR SYSTEM Operation Manual

2 .2 .5 AeroDR Interface Unit2

The component names and functions of the AeroDR Interface Unit2 are as follows.
(1) Exhaust outlet (2) Top cover
(6) Side cover
(7) Spacer
Number Name
(1) Exhaust outlet
(2) Top cover
(3) Detector Connection LEDs
(4) Power switch
(5) Rear cover
(6) Side cover
(7) Spacer
(8) Front cover
(9) Generator Interface LEDs
(10) Cable outlet
(11) Hand switch
(11) Hand switch
(3) Detector
(5) Rear cover
Connection
LEDs
(4) Power
switch
(9) Generator (10) Cable outlet
Interface LEDs
(8) Front cover
Exhausts internal heat.
Protects the internal parts.
Indicate the status of the AeroDR Interface Unit2.
Turns the AeroDR Interface Unit2 on/off.
Protects the internal parts.
Protects the internal parts.
• Prevents exhaust outlet from being blocked after installation.
• No spacers may be provided on some side covers that will not come in contact
with walls.
Protects the internal parts.
Indicate the status of the AeroDR Interface Unit2.
Outlet for various cables.
When S-SRM connection is adopted, a hand switch is installed in the AeroDR
Interface Unit2.
47
2.2 Component names and functions
(1) Exhaust outlet
(6) Side cover
(7) Spacer
Functions