Term Description - Konica Minolta AeroDR SYSTEM Operation Manual

Introduction

Term description

The meanings of terms used in this operation manual are as follows:
Terms
DR Detector
Image processing controller
Calibration
PoE
Aero Sync
Aero Storage
Access Point
I/F Cable
Wired cable
Serial exposure
Collective term indicating AeroDR 1417HQ, AeroDR 1417S, AeroDR 1717HQ,
AeroDR 1012HQ, AeroDR 2 1417HQ, AeroDR 2 1417S, AeroDR 3 1417HD,
AeroDR 3 1717HD and AeroDR 3 1012HQ.
The CS-7 or ImagePilot is referred to as the image processing controller.
Processing for calibrating the characteristics of the DR Detector for each pixel.
An abbreviation for Power over Ethernet. Provides power using an Ethernet cable.
This is a mode in which exposure is performed without being synchronized with the X-ray
device.
This function allows you to expose without using the image processing controller.
Collective term indicating the AeroDR Access Point and general-purpose access points.
The AeroDR Access Point 2 is included.
Collective term indicating the AeroDR I/F Cable (10 m/20 m), AeroDR I/F Cable2 (10 m/20 m),
I/F Cable3 8mD, I/F Cable3 8mU, I/F Cable3 0.67mU, I/F Cable4 8mD and I/F Cable4 8mU.
Collective term indicating I/F Cable and AeroDR UF Cable.
An exposure method to capture multiple frame images serially taken by the pulse irradiation
from an X-ray generator device.
Explanation
10