Connecting To A Pc; Overview - u-blox XPLR-AOA-3 User Manual

Angle events can also be visualized in the s-center [7] using the "IoT > Angle of Arrival" tab, as shown
in Figure 7.
Figure 7: s-center with Angle of Arrival tab

3.3 Connecting to a PC

3.3.1 Overview

A host PC communicates with ANT-B10 over UART interface (TX, RX, CTS, RTS) through EVB-ANT-1.
The pin-headers connecting the two boards together is physically located in the center of the each
board. See also Assembling the kit.
To test ANT-B10 as a standalone unit independently of EVB-ANT-1, the host PC can also attach to
the UART interface through an expansion board fitted to the underside of the antenna board.
UBX-22006906 - R03 Page 12 of 44
C1-Public