Suggested Accessories - u-blox XPLR-AOA-3 User Manual

Figure 9 shows the pin positions on the ANT-B10 connector.
Figure 9: ANT-B10 connector pin assignment (top view)

3.3.3 Suggested accessories

Figure 10 shows (from left to right) the components needed to connect ANT-B10 to the host PC.
• USB adapter cable with male USB Type-A connector to male mini-B connector
•
FTDI FT232RL USB-to-TTL Serial Converter Adapter Module 5 V and 3.3 V for Arduino
• Female-to-female jumper set
•
Dual-row, 1.27 mm pitch, 20-pin, female adapter (to avoid pin damage on the ANT-B10 board)
Figure 10: Components required for PC connection
UBX-22006906 - R03
C1-Public
Page 14 of 44