Package Contents - Wayne-Dalton TorqueMaster 9800 Series Installation Instructions And Owner's Manual

Package Contents

(1) OPERaTOR BRaCkET
(2) Fully aDjusTaBlE RH/lH
FlaGaNGlE (as REquIRED)
FlaGaNGlE (as REquIRED)
(2) HORIzONTal aNGlE
IDRIVE OPERaTOR
®
(sOlD sEPERaTEly)
RIGHT & lEFT q.I. jaMB BRaCkETs
DRuM WRaPs
(as REquIRED)
RIGHT & lEFT 36 TOOTH WORM GEaR
END BRaCkETs (as REquIRED)
(2) 3/8"- 16 HEx NuTs
(4) 1/4"-20 x 5/8"
(4) 1/4"-20 x 9/16" laRGE
CaRRIaGE BOlTs
HEaD RIBBED TRaCk BOlTs
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
NOTE: DEPENDING ON THE DOOR MODEl, sOME PaRTs lIsTED WIll NOT BE suPPlIED IF NOT
NECEssaRy. REaR suPPORTs May OR May NOT BE INCluDED WITH yOuR DOOR.
(2) quICk INsTall RH/lH
RIGHT aND lEFT CaBlE
(80" OR 94")
DRuM assEMBlIEs
(as REquIRED)
F.a. jaMB BRaCkETs
(as REquIRED)
COuNTER COVERs
(as REquIRED)
Pull ROPE &
luBRICaTING OIl
sCREW EyE
(as REquIRED)
(IF INCluDED)
5/16" x 1 5/8" HEx HEaD laG
sCREWs (as REquIRED)
1/4"-14 x 5/8" sElF TaPPING
sCREWs (as REquIRED)
DOOR sECTIONs (as REquIRED)
(1)TORquEMasTER sPRING TuBE
®
(2) HORIzONTal TRaCk RH/lH
WEaTHER sEal & NaIls
(IF INCluDED)
(2) TOP BRaCkET slIDE
(2) TOP BRaCkET BasE
COuNTER GEaR ROllERs
(as REquIRED) (as REquIRED)
(1) lOOsE WINDING sHaFT
(sINGlE sPRING ONly)
(2) 3/8"-16 x 3/4"
TRuss HEaD BOlTs
1/4"-20 x 7/8" sElF DRIllING
(2) #10 PHIllIPs
HEaD sCREWs
DOOR sTOP & NaIls
(IF INCluDED)
(2) VERTICal
TRaCk RH/lH
(1) CENTER BRaCkET
assEMBly
1/4"- 20 FlaNGED HEx
NuTs (as REquIRED)
1/4" - 20 x 9/16" TRaCk
BOlTs
sCREWs (as REquIRED)
3