Package Contents - Wayne-Dalton 464 Installation Instructions And Owner's Manual

4-3/4"
3/8" x 3"
1"
Sleeve anchor
3-1/2"
Optional
mounting bracket
4-3/4"
3-1/2" 1"
3/8" x 3"
Sleeve anchors
Optional
mounting bracket
3-1/2" Min. Sideroom
1"
3-1/2"
4-1/2" Min.
4" Min. Sideroom
2" x 6" Jamb Is
recommended
1"
5/16" x 1-5/8"
Lag screw
3-1/2"
2" Track At The Floor:
3-1/2" Min.
Pre-cast Wall With Corner Angle
Sideroom
5/16" x 1" Self
drilling screw
1" Overlap
1/2"-5/8"
2" Track At The Floor: Pre-cast
3-1/2" Min.
Wall Without Corner Angle
Sideroom
1" Overlap
1/2"-5/8"
2" Track At The Floor:
Steel Jambs
5/16" x 1" Self
drilling screw
1" Overlap
1/2"-5/8"
2" Track At The Floor:
Wood Jambs
Flush
1/2"-5/8"
5-1/2"
3/8" x 3"
Sleeve anchor
3/4"
Optional
mounting
bracket
4-1/4"
5-1/2"
3/8" x 3"
Sleeve anchors
Optional
mounting
bracket
3/4"
4-1/4"
4" Min. Sideroom
3/4"
4-1/4"
5-1/2" Min.
5-1/2" Min.
Sideroom
2" x 6" Jamb Is
recommended
3/4"
5/16" x 1-5/8"
Lag screw
4-1/4"

Package Contents

NOTE: Depending on the door model, some parts listed will not be supplied if not required.
Rear Back Hangs may not be included with your door.
4
3" Track At The Floor:
4" Min.
Pre-cast Wall With Corner
Sideroom
Angle
5/16" x 1" Self
drilling screw
1" Overlap
1/2"-3/4"
3" Track At The Floor:
4" Min.
Pre-cast Wall Without
Sideroom
Corner Angle
1" Overlap
1/2"-3/4"
3" Track At The Floor: Steel
Jambs
5/16" x 1" Self
drilling screw
1" Overlap
1/2"-3/4"
3" Track At The Floor:
Wood Jambs
Flush
1/2"-3/4"