Table of Contents
Advertisement
6.2.
Adjustment #1: Wedge Centering
a. Adjust the upper and lower contour rollers away from the wedge so they will not interfere
with the wedge centering adjustment. Using a 4mm hex wrench remove the Lower
Contour Roller Adjustment Cover (1) (see Figure 1) to expose the Adjustment Screw.
Using a 10mm box end wrench loosen the Locknut (2) (see Figure 1). Using a 3mm hex
wrench turn the Adjustment Screw (3) (see Figure 1) counter-clockwise, lowering the
Lower Contour Roller Assembly (4) (see Figure 1) away from the Wedge.
Pro-Wedge 3XL Manual
(4)
(3)
(1)
Figure 1
Pro-Wedge 3XL Operator's Manual
Rev A: May 2010
(2)
Page 10
Advertisement
Table of Contents
