Rev A: May 2010
d. Move the Wedge to the Engaged/Welding position by rotating the Wedge Engagement
Handle (1) (see Figure 4) counter-clockwise. Using a 5mm hex wrench adjust the Wedge
with the Wedge Height Adjustment Screw (2) (see Figure 4) as needed, up or down, to
center the Wedge between the Nip Rollers. Turning the Adjustment Screw clockwise
raises the Wedge, counter-clockwise lowers it.
(1)
(2)
Figure 4
Page 13
Pro-Wedge 3XL Operator's Manual
Pro-Wedge 3XL Manual