Rev A: May 2010
b. Using a 10mm box end wrench loosen the Locknut (1) (see Figure 2) on the Upper
Contour Roller Adjustment Knob. Turn the Adjustment Knob (2) (see Figure 2) counter-
clockwise, raising the Upper Contour Roller Assembly (3) (see Figure 2) away from the
Wedge.
(4)
(5)
(2)
(1)
(3)
Figure 2
Page 11
Pro-Wedge 3XL Operator's Manual
Pro-Wedge 3XL Manual