Table of Contents
Advertisement
Rev A: May 2010
9. Service/Spare Parts ID
Refer to the diagrams and related parts lists on the following pages to identify service/spare parts
for the Pro-Wedge 3XL. To locate a part find it visually on one of the exploded assembly
diagrams and note its item number. The item number is the upper digit in the item identification
balloon. The lower digit in the balloon is the quantity used per assembly. Next refer to the
related parts list to identify the corresponding DemTech part number. The diagram and parts
lists provided are as follows:
9.1.
500-0100/3XL/A, Assembly, Pro-Wedge 3XL (Front) ............................26
9.2.
500-0100/3XL/A, Assembly, Pro-Wedge 3XL (Rear) ..............................27
9.3.
9.4.
9.5.
500-1005XL/A, Assembly, Pro-Wedge XL Controller Housing ............31
9.6.
9.7.
500-1006/3XL/A, Assembly, Pro-Wedge 3XL Control Panel .................34
9.8.
9.9.
500-101/3XL/A, Assembly, Main Frame ..................................................36
9.10. 500-101/3XL/A, Assembly, Main Frame (Parts List) ..............................37
9.11. 500-167/3XL/A, Assembly, Nip Arm ........................................................38
9.12. 500-167/3XL/A, Assembly, Nip Arm (Parts List) ....................................39
9.15. 500-120.6/3XL/A, Assembly, Contour Roller, Lower .............................43
9.16. 500-120.6/3XL/A, Assy, Contour Roller, Lower (Parts List) .................44
9.17. 500-120.7/3XL/A, Assembly, Contour Roller, Lower .............................45
9.18. 500-120.7/3XL/A, Assy, Contour Roller, Lower (Parts List) .................46
Page 25
Pro-Wedge 3XL Operator's Manual
Pro-Wedge 3XL Manual
Advertisement
Table of Contents
