Demtech Pro-Wedge 3XL Operator's Manual page 2

© Copyright 2010 by DEMTECH Services, Inc.
The text of this publication, or any part thereof, may not be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying, recording, storage in
an information retrieval system, or otherwise, without prior written permission of DEMTECH
Services, Inc.
Any software program contained within the Pro-Wedge 3XL
protected by copyright laws that pertain to computer software. Use of this software does not
authorize de-compiling, disassembling or reverse engineering to gain access to the program code.
DEMTECH Services, Inc. does not authorize any copying, changing, or other use of this
software.
Patents have been granted and/or patent applications are pending or are in the process of
preparation on all DEMTECH Services, Inc. developments.
The material in this manual is for informational purposes only and is subject to change without
notice.
DEMTECH Services, Inc. assumes no responsibility for any errors that may appear in this
manual.
Pro-Wedge 3XL Manual
All Right Reserved
Notice
Printed in the USA
Manual Number: 500-Manual/3XL, Rev. A
DEMTECH Services, Inc.
Ship to address: 6414 Capitol Avenue
Diamond Springs, CA 95619 U.S.A.
Telephone: (530) 621-3200
Toll Free: (888) 324-9353
Fax: (530) 621-0150
Web Site: www.demtech.com
Pro-Wedge 3XL Operator's Manual
Rev A: May 2010
TM for operation of the welder is
ii