Table of Contents
Advertisement
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (Building Scenario)
Tab
Issue 03 (2022-11-25)
Parameter
Dehumidifying
function
DO_1 action
DO_2 action
DO_1
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Power-On Commissioning
Description
● Enable: The device starts
dehumidifying when the ambient
humidity is higher than the
humidity setpoint.
● Disable: The dehumidifying function
is disabled.
This parameter can be set to On or
Off, and is used together with DO_1.
For details, see DO_1 description.
This parameter can be set to On or
Off, and is used together with DO_2.
For details, see DO_2 description.
● If this parameter is set to Smoke &
Water only, DO_1 acts according to
DO_1 action when a smoke or
water overflow alarm is generated.
● If this parameter is set to Critical
alarm, DO_1 acts according to
DO_1 action when a critical alarm
is generated.
● If this parameter is set to Major
alarm, DO_1 acts according to
DO_1 action when a major alarm is
generated.
● If this parameter is set to Alarm,
DO_1 acts according to DO_1
action when a critical alarm, major
alarm, or warning is generated.
● If this parameter is set to Startup
status, DO_1 acts according to
DO_1 action when the unit is
started.
● If this parameter is set to Power
abnormal, DO_1 acts according to
DO_1 action when a power
exception alarm is generated.
● If this parameter is set to No, no
alarm is generated when DO_1 is
disconnected.
68
Advertisement
Table of Contents
