Table of Contents
Advertisement
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (Building Scenario)
Air Duct Type
Air exhaust duct
(involved only in
indoor scenarios)
Figure 8-7 Installing air ducts
(1) Air exhaust duct (involved
only in indoor scenarios)
(4) Air return duct
----End
Issue 03 (2022-11-25)
Installation Requirements
Use ST4.8x16 tapping screws and tighten them to a torque
of 1.5–2.6 N·m. The recommended screw spacing is 150
mm.
The sleeper beams and air cap need to be prepared. For
details, see
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Installing Air Dampers and Air Ducts
C Installing an Air
(2) Sleeper beams
(5) Air supply duct
Cap.
(3) Air dampers
53
Advertisement
Table of Contents
