Table of Contents
Advertisement
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (Building Scenario)
Networking
Note
Figure 7-8 Connecting communications cables (standalone)
Figure 7-9 Connecting communications cables (shared)
If the length of a network cable in the FE teamwork is greater than or equal to
100 m, use the group-based ring networking mode.
1.
Issue 03 (2022-11-25)
FE Teamwork
A teamwork network supports
a maximum of 16 units.
NO TE
● If the Modbus-TCP/SNMP protocol is used, customers can purchase the NetEco (a LAN
switch is required) or a third-party NMS as the monitoring system.
● If the number of units in a group is greater than 16, FE teamwork needs to be
implemented by group. For example, if the number of units under teamwork is 18, they
can be divided into two groups, for example, 9+9, 16+2, or 10+8.
Connecting units with odd numbers: Connect the FE_1 port of the unit with
an odd number to the FE_2 port of the unit with the next odd number.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 Installing Cables
FE Monitoring
● In the standalone cable
connection scenario, retain
the default value
Standalone for Monitor FE
cable connection mode on
the Access Control screen
of each unit.
● In the shared cable
connection scenario, set
Monitor FE cable
connection mode to
Shared on the Access
Control screen of each
unit.
31
Advertisement
Table of Contents
