Track Control - Zeiss ELYRA 7 Operating Manual

ELYRA 7
5.2.10.3

Track Control

Each laser can be selected for a track by checking the corresponding box (see Fig. 138, Fig. 139,
Fig. 140).
Fig. 138 Channel tool – track control;
appearance for the WF imaging
mode of ELYRA 7 Types S & eLS
For each checked laser the AOTF slider becomes
available that allows to set the laser power via the
slider or the input box.
Note that for the WF imaging mode no laser
line is available but the epi illumination is
used.
03/2019 V_02
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2262-999
Fig. 139 Channel tool – track control;
appearance for the Lattice SIM
imaging mode of ELYRA 7 types S &
eLS
Fig. 140 Channel tool – track control;
appearance for the Laser WF
imaging mode of ELYRA 7 Types S
& eLS
ZEISS
97