Use Of The Terminal; Power On/Power Off The Terminal - Ingenico AXIUM EX8000 User Manual

3. Use of the terminal

3.1 Power on/Power off the terminal

Power On Terminal:
Make sure the terminal battery is correctly installed.
Press <Power> button for about 1s until the display is turned on.
Power Off Terminal:
Press and hold <Power> button for more than 2s until the display shows the following
menu.
Press <Power off>.
Battery Low:
If the battery is empty, the terminal will automatically shut off.
Terminal restart:
In the event of abnormal behavior of the terminal, press and hold the power button for 8
seconds to force the terminal to power off.
Screen saver mode:
To conserve battery power, the screen may be turned off with a short press of the
power button. (approximately 0.5 seconds).
AXIUM EX8000
11/17
9
Banks and Acquirers International Holding SAS
Copyright© 2022Ingenico–
All rights reserved