Agilent Technologies N2797A User Manual page 2

Notices
© Agilent Technologies, Inc. 2013
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
N2797–97000
Edition
July 2013
Designed in USA
Agilent Technologies, Inc.
Oscilloscope Products Division
Warranty
The material contained in this document is
provided "as is," and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted
by applicable law, Agilent disclaims all war-
ranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection
with the furnishing, use, or performance of
this document or of any information con-
tained herein. Should Agilent and the user
have a separate written agreement with
warranty terms covering the material in this
document that conflict with these terms,
the warranty terms in the separate agree-
ment shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcon-
2
tract, Software is delivered and licensed as
"Commercial computer software" as
defined in DFAR 252.227-7014 (June 1995),
or as a "commercial item" as defined in FAR
2.101(a) or as "Restricted computer soft-
ware" as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or disclo-
sure of Software is subject to Agilent Tech-
nologies' standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Instrument Markings
The CE mark is a registered trade-
mark of the European Community.
ISM GRP 1-A denotes the instru-
ment is an Industrial Scientific and Medical
Group 1 Class A product. ICES/NMB-001
indicates product compliance with the
Canadian Interference-Causing Equipment
Standard.
This product complies with the
WEEE Directive (2002/96/EC)
marking requirements. The
affixed label indicates that you
must not discard this electri-
cal/electronic product in domestic house-
hold waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is
classed as a "Monitoring and Control instru-
mentation" product. Do not dispose in
domestic household. To return unwanted
products, contact your local Agilent office,
or refer to www.agilent.com for more infor-
mation.
This symbol indicates the Envi-
ronmental Protection Use Period
(EPUP) for the product's toxic
substances for the China RoHS require-
ments.
Safety Notices
C A U T I O N .
A CAUTION notice
denotes a hazard. It calls attention to
an operating procedure, practice, or the
like that, if not correctly performed or
adhered to, could result in damage to
the product or loss of important data.
Do not proceed beyond a CAUTION
notice until the indicated conditions
are fully understood and met.
W A R N I N G .
A WARNING notice
denotes a hazard. It calls attention to
an operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result in
personal injury or death. Do not pro-
ceed beyond a WARNING notice until
the indicated conditions are fully
understood and met.
N2797A User's Guide