Table of Contents
Advertisement
Using the Probe
1
Probe Features
Attaching Probe
It's easy to change the probe tip and ground accessories.
Accessories
Figure 3
on page 13 shows locations for inserting the tip
and the ground accessory. To change an accessory, gently
pull it straight out of its contact socket along the axis of the
probe. Once the accessory is removed, insert the new
accessory until it is seated in the contact socket. In order to
insert the probe tip completely into the housing, carefully
press the probe tip against a hard surface.
Figure 3
Tip and Grounding Connections
N2797A User's Guide
13
Advertisement
Table of Contents
