Table of Contents
Advertisement
Using the Probe
1
Using the Accessory Tips and Grounds
Solderable Tip with
The solderable pin and right- angle ground
Right-Angle Ground
provide hands free probing at extreme
temperatures. Solder the tip on the
printed- circuit board as shown in
Figure 6
and then slip the probe onto the free end
of the solderable pin.
NOTE
The longer right-angle ground lead introduces increased inductance in the
ground path. Therefore, keep the right-angle ground lead as straight as
possible for maximum measurement bandwidth. Loops and bends in the
ground lead, as shown in this picture, can reduce the measurement
bandwidth.
Figure 6
Placing the Probe Onto the Solderable Tip
N2797A User's Guide
17
Advertisement
Table of Contents
