Table of Contents
Advertisement
1
Using the Probe
Inspecting the Probe
Inspecting the Probe
Cleaning the Probe
22
■
Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning
material until the contents of the shipment have been
checked for completeness and the probe has been checked
mechanically and electrically.
■
Check the accessories.
■
If the contents are incomplete or damaged, notify your
Agilent Technologies Sales Office.
■
Inspect the probe.
If there is mechanical damage or defect, or if the probe
does not operate properly or pass calibration tests, notify
your Agilent Technologies Sales Office.
If the shipping container is damaged, or the cushioning
materials show signs of stress, notify the carrier as well
as your Agilent Technologies Sales Office. Keep the
shipping materials for the carrier's inspection. The Agilent
Technologies office will arrange for repair or replacement
at Agilent Technologies' option without waiting for claim
settlement.
Disconnect the probe from the oscilloscope and clean the
probe with a soft cloth dampened with a mild soap and
water solution. Make sure the probe is completely dry before
reconnecting it to an oscilloscope.
N2797A User's Guide
Advertisement
Table of Contents
