Table of Contents
Advertisement
1
Using the Probe
Using the Accessory Tips and Grounds
6 cm Y-Leads
with 0.1" Headers
16
The short 6 cm long Y- leads offer a
convenient and reliable method to connect
both the probe signal and ground to probe
points on the board via or the solderable
pins that are provided with each probe.
The sockets accept 0.56 to 0.86 mm round
and 0.64 mm square (0.022 to 0.034 inch
round and 0.025 inch square) diameter pins. The maximum
insertion depth is 7.5 mm (0.295 inch) and the outer
insulation of the socket is less than 2.54 mm. You can use it
for 2.54 mm pitch (0.1 inch) terminals.
Figure 5
Probe with Y-Leads Attached
N2797A User's Guide
Advertisement
Table of Contents
