Calibration; White Color Calibration; Rgb Calibration; Calibration Reset - SHOWTEC Spectral M400 IP67 Manual

Spectral M400 IP67

8. Calibration

With this menu, you can adjust the characteristics of the white color or set the RGB calibration.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) Now you have gained 3 additional options.
05) Press the UP/DOWN buttons until the display shows one of the following 3 options:

8.1. White color calibration

With this menu you can adjust the temperature of the built-in white color presets.
01) When the display shows
02) Press the UP/DOWN buttons to choose one of the 11 white color presets: WT.01 – WT.11.
03) Once you have chosen the desired preset, press the ENTER button to open the submenu.
04) Press the ENTER button to toggle between RED, GREEN and BLUE.
05) Press the UP/DOWN buttons to increase/decrease the intensity of the chosen color. The adjustment
range of each color is between 0-255, from OFF to FULL ON.

8.2. RGB calibration

With this menu you can adjust the temperature of the white color.
01) If the display shows
02) Press the ENTER button to open the submenu.
03) Press the ENTER button to toggle between the RED, GREEN and BLUE.
04) Once you have chosen the desired color, press the UP/DOWN buttons to set the color intensity. The
adjustment range is between 0-255, OFF to FULL ON.

8.3. Calibration reset

With this menu you can reset the calibration settings.
01) If the display shows
02) Press the ENTER button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04) The display will show

9. Safety Lock

01) When the display shows
02) Press the UP/DOWN buttons to choose between ON and OFF.
03) If you have selected ON, press the ENTER button to confirm.
04) It will now take 25 seconds for the device to become locked.
05) If this options remains active, the device will always ask for the password upon start-up.
06) In order to unlock the device, press the following buttons in the following order:
UP>DOWN>UP>DOWN and confirm by pressing the ENTER button.
Ordercode: 43534
White color calibration
RGB calibration
Calibration reset
, press the ENTER button to open the menu.
, press the ENTER button to open the menu. The display shows
, press the ENTER button to open the menu. The display shows
and the calibration settings will have been reset.
, press the ENTER button to open the menu.
.
20
.
.